L6 Robot Vacuum Cleaner

Clean the dust box or replace the HEPA filter.

1. Check if "Do not disturb" time conflicts.
2. Enable the "resume cleaning" function.

1. install the dust box well in place. Check if the metal contact pieces of the dust box and robot are free from dirt

2. Replace the dust box if the metal contact pieces on both sides appear to be different. if so, please reachcustomer service.

1. Tighten the lid of the water tank.
2. Adjust the water volume via APP.

1. Use the original charger and place the charging base horizontally. Unplug and plug it, then try to recharge.
2.Reinstall the battery.
lfin vain,please reach customer service.

1. Charge the robot for 4-5 hours and check if the light of the charging stand is energized when charging.
2. When fully charged, check how long the robot could run and the battery level.
3.Replace the battery if needed.

1. Check if the charging base is powered. Unplug and plug it in for charging.
2. Leave enough space around the charging base for better receiving the signal.
3. Check if the metal charging pieces of the robot are free from dirt such as oxide.
If in vain, please reach customer service.

1. Please use the APP with a 2.4GHz network.
2. Press both buttons on the robot until the lights flash blue to enter network configuration mode.3. Choose the Wifi and enter the password correctly. Keep the Wifi password between 8-12 characters long.4.Connect to the then returns to the APP
Please redch customerhotspot does not appear on the WiFi page.

Place the robot on a flat surface/floor, then restart it. (The robot needs to reposition itself when the surroundings change, so this is a normal reminder).